Direct Monitoring Activate this option to monitor via your audio hardware and to control it from Cubase. The following options are available: Control Panel Opens the control panel for the audio hardware. Make sure you have the right driver! Show As Allows you to rename the port. I've looked at a bunch of cubase recording tutorials and they haven't offered much troubleshooting advice so any help would be greatly appreciated. If you have more than just one keyboard or sound module, or more than one controller, the 2x2 is perfect.
If this is a laptop make sure you have any power saving profiles disabled and turned off. Input Latency Shows the input latency of the audio driver. You can use DriverTuner to download and update almost any device drivers from any manufacturers such as Asio. Your sound should show up on the level meter. This name is used in the Input Routing and Output Routing pop-up menus.
I found C-Media often tells you you have a chipset, but if you check your motherboard you have another usually 8338 instead of 8330, which seems to be quite old. State The state of the audio port. Uploader: Date Added: 8 October 2004 File Size: 69. If you're getting errors, it could mean you have the wrong driver. This is one hard-as-Hell set of drivers to find.
Got a new audio interface, Trsck Quad by M-Audio, just updated driver for it and connected it, per the device instruction manual. I'm using an M-audio fast track usb to plug my bass into the computer and using cubase 5. Hit the record button on the transport and you should see a waveform being recorded in the track. Then I tried just checking one but not the other, no change. . I spent hours tracking this sucker down, and I'm an expert. Port System Name The system name of the port.
But why would the tracks not play at all? I compiled this for those people. I am wondering if it is limitation of my sound card. Those can also block modules from being loaded. The M-Audio is now your soundcard so disabling your internal soundcard is a good idea so there are no conflicts. Externally Clocked Activate this option, if you use an external clock source. So no sound, but it took longer to freeze.
Uninstall anything that was installed before! The computer will not correctly load hardware drivers on a soft restart. Dan R Employee April 16, So this interface will work fine with Reaper, Adio guess I just got a lemon. I had this same problem using the M-Audio Driver. I did find a fix for this problem. General Publisher Publisher web site Release Date August 30, 2010 Date Added September 02, 2010 Version 2. I thought I had because the bar was full and it gave me a message but I just clicked finish thinking it had installed. Might work for some other headsets also as thier are other listed in the install.
Overall Rating: 243 ratings, 376 reviews 53,659 Downloads Submitted Mar 11, 2000 by Jonny K. I've tried the 32-bit version, vista, xp, etc. After making that selection, I was unable to get any sound from the M-Track quad with any other program e. Ports Reset Allows you to reset all port names and visibilities. I'm using 64-bit windows 7 and have the right driver, it just won't dl. Cannot get Reaper to work with M-Track Quad interface — Cockos Incorporated Forums Dan R Employee April 07, Have you got anything-else that can use the interface? Send a private message to 4x4uk.
Pros Summary I consider myself very tech savvy. Then recommend the latest Asio drivers. However, for my setup I was able to change the card settings freely when Cubase wasn't running, even though it was the system default. Luca How does this make you feel? Send a private message to paulheu. When installing hardware drivers you need to set the slider to the lowest setting to allow the driver to install all of it's modules properly without being blocked by Windows it's always trying to protect you? I had no issues previously using my emu as a usb audio device. No other pograms opened except iTuens or Chrome. Summary Just uninstalled it as it is useless for me and I'm happy the uninstall worked well.
Make sure before you try installing the driver you have that all the way to the bottom setting. Overall Rating: 5 ratings, 6 reviews 3,172 Downloads Submitted Aug 1, 2008 by Jason M. Ok so I figured out the problem was because I never installed the driver. I gave it 2 stars as it gives me 2 channels out of 6. This will, of course be dependent upon a couple of factors. All of Asio drivers are installed now, Enjoy it.